LAMI-TACK - Specification and Physical Properties

Specification of LAMI-TACK

Grade Base film Both treatment type Lamination side Application
SSO OPP Innner side Print lamination(Gloss type)
MSSO Matte OPP Innner side Print lamination(Matte type)
  • Standard length
    SSO: 3000m
    SSO: 2750m
  • We can also produce other type of base film Lami-Tack as desired.

Physical properties of LAMI-TACK gloss type

Properties Unit LAMI-TACK Solvent
- type
lamination
Test method
SSO MSSO
Both treatment type
Wetting tension Base film side mN/m 38 39   JIS K-6768
Gloss after lamination Base film side % 88.4 5.0 79.0 JIS K-7105
Adhesive
strength
100°C immediately
after
  6.9
(700)
7.1
(710)
immediately after
2.2
(220)

3 days after
3.5
(340)
-
3 days after   11.7
(1190)
11.2 (1120)
110°C immediately
after
N/25mm 9.5
(970)
8.4
(850)
3 days after (g/25mm) 12.3
(1250)
11.0 (1130)
120°C immediately
after
  9.8
(1000)
9.2
(930)
3 days after   12.5
(1270)
11.6
(1190)
Appearance   good - not good JF Method
  • Measuring condition (Room thmperature: 23°C, Humidity: 50%)
  • Above table contains measured values and not guaranteed values.
  • Laminating conditions
    Nip roll temperature: 100°C - 120°C, Line speed: 30m/min, Nip pressure: 55.6kg/cm
  • Test Paper
    Paper: Coated paper (209.4 g/m2), Ink: TK HY-Unity Ink MZ
  • Measuring condition
    Adhesive strength: (180° peal, 300m/min), Gloss: measuring angle60°
  • Appearance test
    good (very good) good (good) not good (not good) bad (bad)
Top of page